Anil Kumar Gillawat

Pursuing Ph.D from Sardar Vallabhbhai National Institute of Technology, Surat.

M.Tech. from NIT Surat in 2010.

B.Tech. from NIT Surat in 2008.

Presently working as HOD in Department of Mechanical Engineering of Dronacharya College of Engineering, Khentawas, Farrukhnagar from 14th July 2015.

Worked as an Assistant Professor in Mechanical Engineering Department at World College of Technology & Management, Farrukhnagar from 15th Jan 2015 to June 2015.

Worked as an Assistant Professor in Department of Mechanical Engineering of Dronacharya College of Engineering, Khentawas, Farrukhnagar 17th Jan 2011 to 20th July 2011.

Worked as an Assistant Professor in Lovely Professional University, Jalandhar from 3rd Aug 2010 to 3rd Dec 2010.

Anil Kumar Gillawat, Hemant J. Nagarsheth, Mansi Nagarsheth, and H. D. Desai, Development of RRR Type Anthropomorphic Shoulder Joint Model and its Dynamics, Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2012, WCE 2012, 4-6July, 2012, London, U.K., pp. 1692-1696.

Gillawat, Anil Kumar, Nagarsheth, Hemant J., Nagarsheth, Mansi H., Kushwaha, Nirmal Kumar, “Kinematics and Dynamics Of Four R-Type Joint Anthropomorphic Finger”, The 25th Congress of the International Society of Biomechanics, Glasgow, 2015.

Engineering & Technology Research Group, Dignified Researchers Publication, http://etrg.org/committee.php.

International Journal of Emerging Technology and Advanced Engineering http://www.ijetae.com/editorial_board.html.

International Journal of Scientific Progress and Research www.ijspr.com

International Journal Of Innovative Trends In Engineering www.ijite.com

Attended 3 Day workshop on Ansys & Creo on 1st – 3rd September 2016 at Dronacharya College of Engineering.

Attended 3 Days Advanced Industrial Automation Training on Human Machine Interface (HMI) on 9th – 11th Aug. 2016 at Dronacharya College of Engineering.

Attended Workshop on Basics of IPR and Commercialisation of Technology for Start - Ups and Incubates on 8th July in New Delhi, 2016.

Attended Short Term Course on Research Methodology, organised by NITTTR Chandigarh from 06th – 17th June 2016.

Attended Short Term Course on Embedded C programing of Microcontrollers through ICT, organised by NITTTR Chandigarh from 2nd – 06th May 2016.

Attended 8 Week Course on Basics of Finite Element Analysis-1 organised by Dr. Nachiketa K Tiwari, IIT Kanpur held from 18th Jan- 12th March 2016.

Attended Short Term Course on AutoCAD, organised by NITTTR Chandigarh from 14th – 18th March 2016.

Attended Smart Manufacturing Summit 2015 organised by The Confederation of Indian Industry’s (CII) Manufacturing Council at The Eros Hotel, New Delhi, on 27th November 2015.

Attended TEQIP sponsored Three-Day Short Term Training Program on Advanced Robotics: Design Planning & Control, organised by Mechanical Engineering Department, Thapar University, Patiala, from 21-23 March 2013.

Attended One Week Short Term Training Programme on Fuzzy Logic, Image Processing and Their Applications, organised by Department of Computer Engineering and Department of Applied Mathematics and Humanities, SVNIT, Surat from 1 – 5 October, 2013.

Attended One Week Short Term Training Programme on Numerical Methods in Engineering and Science, organised by Department of Applied Mathematics and Humanities, SVNIT, Surat from 1 – 5 January, 2014.

Attended A Week Short Term Course on Advances in Control and Instrumentation Education, organised by Electrical Department, SVNIT, Surat, from February 24-28, 2014.

Attended ISTE - PTU Faculty Development Programme on Mathematical Modelling in Science and Engineering organised by Department of Applied Mathematics and Humanities, SVNIT, Surat from 23rd – 27th June, 2014.

Attended Science Academies’ Lecture Workshop on Partial Differential Equations and Its Applications, held at Department of Applied Mathematics and Humanities, SVNIT, Surat, from 1 - 4 March, 2012.

Attended Two day Workshop on Industrial Tribology and Application, organized by Mechanical Engineering Department, SVNIT, Surat on 14th – 15th November, 2014.

Attended Entrepreneurship Education Programme Module 1 of 20 hours, organised by ED Cell, SVNIT and The Centre for Entrepreneurship Development, Gandhinagar, held at SVNIT, Surat, during October - November, 2006.

Attended Entrepreneurship Awareness Camp and SAP Introduction Module for Student, organised by ED Cell, SVNIT in Association with Institution of Engineers, SVNIT, Surat from 12th – 14th September, 2008.

• American Society for Testing and Materials (ASTM International), (Membership No. 1727356)

Society of Automobile Engineers (SAE India 7140512123)

Institution of Mechanical Engineers (Membership No. 80191897)

Institution of Engineers (India), Kolkata (Membership No. AM152897-4)

The Indian Society for Technical Education (ISTE), New Delhi, India (LM/83231)

Association of Machines and Mechanisms (A20140004)

Tribology Society of India (TSI), Faridabad, Haryana, (LM6970)

Indian Institution of Industrial Engineering (IIIE), Navi Mumbai (MIIE 10517(53))

Qualified competition exams such as GATE, AIEEE, and HCET.

Ms. Aakansha

M. Tech from Indira Gandhi Delhi Technical University for woman Delhi in Robotics and Automation in 2016.

B. Tech from Indira Gandhi Institute of Technology Delhi in Mechanical and Automation in 2013.

Presently working as Assistant Professor in Mechanical Engineering Department of Dronacharya College of Engineering, Gurgaon from 8th Aug 2016.

Paper presented title “Active Magnetic Bearing and Flywheel Energy Storage System for Vehicular Application” in Krishi Sanskriti Publication in 2016.

Training at G D Naidu Coimbatore in Automobile Servicing and Maintenance Technology.

Member of an all-girls team, Vidyottama (designed and fabricated a Super Mileage Vehicle) and participated in Shell Eco Marathon 2011, Asia 2011.

Awarded the Certificate of Appreciation by Smt. Shiela Dixit for technically qualifying Shell Eco Marathon 2011 in Malysia.

Mr. Shubhender Singh

M.Tech from “MNIT, Jaipur” in 2015.

B.Tech from “Lovely Professional University” in 2013.

Presently working as Assistant Professor in Mechanical Department in Dronacharya College of Engineering, Gurgaon from 25th July, 2016.

Worked as Faculty in Department of Mechanical Engineering of Drishyam classes, Kangra from 1st August 2015 to 19th June 2016.

AutoCAD from MECHIN CAD TECHNOLOGIES (June 15 – July 22, 2010)

Six sigma Tools and applications from MNIT Jaipur (December 16 - December 20, 2013)

Surya Prakash, Gunjan Soni, A P S Rathore, Shubhender Singh (2015). Risk analysis and mitigation for perishable food supply chain: A case of dairy industry. Benchmarking: an International Journal, 24(1).

Surya Prakash, Shubhender Singh, Gunjan Soni, A P S Rathore: Mitigation strategies for risk management and sustainability in supply chain. National Conference on Sustainable Manufacturing, Malaviya National Institute of Technology Jaipur; 01/2015.

Sandeep, Shubhender Singh, Surya Prakash: MCDM Approach for facility location decisions for humanitarian aid supply chain. National Conference on Paradigms in Mechanical Enigineering (PME - 2014), Department of Mechanical Engineering, Manav Rachna International University, Faridabad, India; 12 /2014.

Four times qualified in GATE exam with 98.45 Percentile in 2016, 98.40 Percentile in 2015, 97 Percentile in 2014 and 98.04 Percentile in 2013.

Ms. Namrata Verma

M.Tech in Material Science and Engineering from Motilal Nehru National Institute of Technology, Allahabad, in 2014.

B.Tech in Mechanical Engineering from Uttar Pradesh Technical University, Lucknow in 2009.

Presently working as Assistant Professor in Mechanical Engineering Department of Dronacharya College of Engineering, Gurgaon from 25th July 2016.

Worked as Assistant Professor, Department of Mechanical Engineering, World Institute of Technology, Sohna Gurgaon from 5th Aug 2015 to 22nd July 2016.

Worked as Assistant Professor, Department of Mechanical Engineering, Institute of Technology and Management, Gorakhpur, Uttar Pradesh from 1st July 2014 to 30th June 2015.

Worked as Lecturer, Department of Mechanical Engineering, Institute of Technology and Management, Gorakhpur, Uttar Pradesh from 1st Aug 2009 to 30th June 2012.

Attended workshop on Multiphysics Simulation Using COMSOL from 7th - 8th Jan 2014.

Qualified GATE 2011, 2012.

Gajanand Sharma

M. Tech in Production Engineering from N. C. College of Engineering & Technology Panipat affiliated to Kurukshetra University, Kurukshetra in 2009.

B. E. (Mechanical Engineering) from: B.R.C.M. College of Engineering & Technology Behal affiliated to M.D. University Rohtak in 2004.

Presently working as Assistant Professor in Mech Department in Dronacharya college of Engineering in July 2015.

Worked as Assistant Professor in St. Margaret Engineering College Neemrana from Sept 2005 to April 2015.

Worked in BKN Govt Polytecnic Narnaul from Aug 2004 to Sept 2005.

Gajanand Sharma, Asstt. Prof., “Overall Equipment Effectiveness as an indicator of TPM activities”, a technical paper accepted and presented in the national conference on recent developments in mechanical engineering held during 19-20 Feb.2010 at B.R.C.M. College of Engg. & Tech., Bahal (Haryana).

Atul Kumar, Asstt. Prof. (S.S.), Gajanand Sharma, Asstt. Prof., “Robustness of the Total Cost in Optimal Inventory Policies”, a technical paper accepted and presented in the national conference on advances in mechanical engineering held during 26-27 Feb.2010 at Baba Banda Singh Bahadur Engineering College (Punjab).

Workshop Coordinator, Thermodynamics in Mechanical Engineering, an ISTE workshop conducted by IIT, Bombay.

Workshop Coordinator, Engineering Mechanics in Mechanical Engineering, an ISTE workshop conducted by IIT, Bombay.

Lecture on “Development and Impact of the Modern high speed train” in IIT, Kharagpur.

Thermodynamics in Mechanical Engineering, an ISTE workshop conducted by IIT, Bombay.

Heat Transfer in Mechanical Engineering, an ISTE workshop conducted by IIT, Bombay.

Research Methodology in Engineering, an ISTE workshop conducted by IIT, Bombay.

Fluid Mechanics in Mechanical Engineering, an ISTE workshop conducted by IIT, Kharagpur.

Priyanka Singh

M.Tech in Applied Mechanics from Motilal Nehru National Institute of Technology, Allahabad, in 2014.

B.E in Production and Industrial Engineering from Delhi College of Engineering, Delhi in 2011.

Presently working as Assistant Professor, Department of Mechanical Engineering, Dronacharya College of Engineering, Gurgaon from 20th Jan 2015.

Worked as Assistant Professor, Department of Mechanical Engineering, Gurgaon Institute of Technology and Management from 01.09.2014 to 26.12.2014.

Kumar Pankaj, Ujjawal Bhardwaj, Priyanka Singh, “In Plane Free Vibrations of Symmetrically Laminated Rectangular Composite Plate” in Advancement and Recent Innovations in Mechanical, Production and Industrial Engineering, vol 1.

Ms. Sarah Khan, Ms. Priyanka Singh, Dr. Binay Kumar. “Impact of Waste Management on Climate Change-Global Trends and Practices” in National Conference on Sustainable Solid Waste Management- An Innovative Approach.

Two-week ISTE STTP on Structural Analysis conducted by Institute of Technology Kharagpur from 04nd to 9th Jan 2016.

Two-week ISTE STTP on Environmental Studies conducted by Institute of Technology Bombay from 02nd to 12th June 2015.

One week workshop on AUTOCAD conducted by NITTTR Chandigarh.

International Conference on Advancement and Recent Innovations in Mechanical, Production and Industrial Engineering from April 10-11, 2015 in I.T.S Engineering College, Greater Noida.

National Conference on Sustainable Solid Waste Management-An Innovative Approach on 15th Jan.2016 organized by Department of Civil Engineering, Dronacharya College of Engineering, Gurgaon.

Qualified GATE 2012

Mr. Manish Kumar Mishra

M.Tech in Machine Design from National Institute of Technology Calicut, Kerala, in 2016.

B.Tech from “Dr. A.P.J. Abdul Kalam Technical University” in 2013.

Presently working as Assistant Professor in Mechanical Department in Dronacharya College of Engineering, Gurgaon from 01 August, 2016.

AutoCAD from INDO DANISH TOOL ROOM, Jamshedpur. (June 17 – June 30, 2011).

CATIA V5R18 from INDO DANISH TOOL ROOM, Jamshedpur. (June 17 – July 15, 2011).

CAD / CAM from MSME-TDC (PPDC), Meerut. (October 15,2012 – January 12, 2013).

Attended Three - Day Workshop on Product Design organized by the Design Innovation Centre, National Institute of Technology Calicut, during 26 - 28 February, 2016.

Mr. Rajesh Mattoo

Masters of Technology (Mfg.Tech.&Automation)from M D University, Rohtak, Haryana in October 2010 with First Division.

Bachelor of Science & Engineering (Mechanical Engg.) from “N.M.U JALGOAN (India)" in July 1998 with First Division.

Working as an Associate Professor in Mechanical Engineering Department at Dronacharya College of Engineering, Khentawas, Gurgoan. from 5th Jan, 2015.

Worked as an Associate Professor in Mechanical Engineering Department at Shri Ram College of Engineering and Management, Palwal. Haryana from July 2013 To Dec 2014.

Worked as an Associate Professor in Mechanical Engineering Department at Dronacharya College of Engineering, Khentawas, Gurgoan from Oct.2000 To July 2013.

Worked as “ Maintenance Engineer” in South India Corporation (Agency) Ltd At Jawahar Lal Nehru Port Trust (Jnpt). Uran, Maharashtra. from Nov-1998 to Sept-2000.

Presented Paper titled “Automation and Robotic Techniques in an Industrial Organisation” at Dronacharya college of Engg. Gurgaon (08thJuly. 2006).

Presented Paper titled “Improving the Energy Efficiency of a Vapour Compressor System using a Phase Change Material” at Dronacharya college of Engg. Gurgaon (11th July. 2008).

Published Paper titled “Effect of Wear at joints in Four Bar Mechanism using ANN” (Vol.III,Issue I) in Dronacharya Research Journal.( Jan- June, 2011).

Published Paper titled “Studies on Rocket Nozzles with Combustion Chamber by fluent Software at MACH 2.1” (Vol.V,Issue I) in Dronacharya Research Journal.( Jan- June, 2013).

Attended National conference on “Renewable Energy Technology and Applications” at Institute of Technology and Management College, Gurgaon, Haryana.(06th January 2006).

Attended National conference on “Automation in Manufacturing Technology” at Northern India Engg. College, New Delhi. (24th – 25th March 2006).

Attended National conference on “Advances in Mechanical Engineering” at Dronacharya College of Engineering, Gurgaon,Haryana.(22nd July 2009).

Attended National conference on “Waste Water Management” at Dronacharya College of Engineering, Gurgaon,Haryana.(15th June 2011).

Attended National conference on “Advances in Fluid and Solid Mechanics” at Dronacharya College of Engineering, Gurgaon,Haryana.(20th August 2011).

Attended workshop on “High Impact Teaching Skills” under MISSION 10X Programme conducted by Wipro.(10th Jan.2011-14th Jan 2011).

Has successfully completed a workshop on “High Impact Teaching Skills” (Advance) under MISSION 10X Programme conducted by Wipro. .(03rdMarch 2011-04th March 2011).

Attended the Train-the-Trainer program for Professors of the Dronacharya college of Engg. as a part of the DEG PPP-Project conducted by BEST KOKI AUTOMOTIVE PVT. LTD. on 12-12-2014.

Attended one-week ISTE STTP for Coordinators on “Environmental Studies” conducted under the National Mission on Education through ICT by MHRD at the Department of CESE and HSS,IIT Bombay during 23rd- 27th March, 2015.

Co-ordinated and Attended two weeks workshop on Environmental Studies at DCE, Gurgaon conducted by IIT, Bombay from 02-06-2015 to 12-06-2015.

Attended National Conference on “Accelerating Industrial Growth” conducted by PHD Chamber of Commerce and Industries on 30th September 2015 at PHD House, New Delhi.

Attended “Industrial Automation Summit 2015” organized by Confederation of Indian Industry’s (CII) Manufacturing Council at Hotel The Crowne Plaza, Gurgaon, on 4 Dec 15.

Attended CII (Confederation of Indian Industry) National FMCG Summit 2015 at Hotel Taj Palace, New Delhi on 21st Dec 2015.

Attended FDP on “Language Skills in English” at Dronacharya College of Engineering, Gurgaon, Haryana.( 8th- 9th Jan. 2015).

Society of Automotive Engineers (SAE)

Indian Society for Technical Education (ISTE)

International Association of Engineers (IAENG)

International Journal of Online Engineering (IJOE)

International Natural Hygiene Society (INHS)

Vijay Raj Pilania

M.Tech from “SVNIT, Surat” in 2014.

B.Tech from “CDLM Govt. Engg. College, Panniwala Mota,Sirsa” in 2011.

Presently working as Assistant Professor in Mechanical Department in Dronacharya College of Engineering, Gurgaon from 6th July, 2015.

Worked as Assistant Professor in Department of Mechanical Engineering of Atmiya Institute of Technology and Science, Rajkot from 31st July 2014 to 9th June 2015.

3rd National Conference On Innovative & Emerging Technologies (NCIET-2015) organized by Smt. S.R. Patel Engineering College, Unjha during 17th & 18th Apr. 2015 , Paper Titled: Finite Element Simulation of a deep drawing process of perforated sheet metal using deform 3d.

“Comparative Study Of Minimum Quantity Lubrication For Machining Process” by Patel HA, Acharya GD and Pilania VR in Journal of Manufacturing Engineering, September 2015, Vol. 10, Issue. 3, pp 121-125.

Presented Paper in National Conference on Devlopment and Advancement in Smart Grid for Sloar Renewable Energy (NC- DASGSRE-16), Organised at Dronacharya college of Engineering, Gurgaon on 16th April 2016.

Presented paper in “BRNS Sponsored Two Day Seminar on “ADVANCES IN INDUSTRIAL TRIBOLOGY” 11 & 12 February 2015. Title “A15027: Comparative study of Minimum Quantity Lubrication for machining process”.

Attended One day workshop on Virtual Lab conducted by IIT Delhi held at Dronacharya college of Engineering, Gurgaon on 21 July 2016.

Short term training Program on Instruction Planning & Delivery ( Module III: Student Evaluation) through ICT conducted by NITTR Chandigarh at Dronacharya college of Engineering, Gurgaon during 16th- 20th Nov 2015.

Organized one day Seminar entitled “Importance of Quality in Industry” with assistance of ASQ at Atmiya Institute of Technology & Science, Rajkot on 22nd Nov. 2014.

Attended 23rd national conference on IC Engines and Combustion, organized by Mechanical Engineering Department, SVNIT, Surat, during December 13th to 16th 2013.

Attended 3rd One Day Seminar on Recent Trends in Industrial Engineering, organized by Mechanical Engineering Department, SVNIT, Surat, on April 6th, 2012.

Attended 19th ISTE annual Gujarat state convention & seminar on Shaping Technical education to meet the challenges beyond 2020, Organized by ISTE Gujarat Section & L.D. College of Engineering, Ahmadabad on 1st January 2015.

Short Term Training Program on Computational Flow and Transport: Modeling, Simulations and Algorithms, organized by Department of Applied Mathematics and Humanities. SVNIT, Surat, during 24th - 28th March 2014.

Student Member of ASTM International

Member, Institution of Mechanical Engineer

Member, The Institution of Engineering and Technology (IET)

Member, International Association of Engineers (IAENG)

Gate: 2015, 2013, 2012, 2011

Mr. Amit Narwal

M.Tech (Mechanical Engineering) from KSU, Karnataka with First Division in 2013.

B.Tech (Mechanical Engineering) from RVU, Rajasthan with First Division in 2010.

Presently working as an Assistant Professor in Department of Mechanical Engineering of Dronacharya College of Engineering, Khentawas, Farrukhnagar since 1st Oct, 2003.

“Improved VCR system by using sub cooling and diffuser” in Journal of International Association of Advanced Technology and Sciences, 15, Oct. 2014.

“Studies on rocket nozzles with combustion chamber by fluent software at mach 2.1”, in Dronacharya Research Journal Dec. 2012.

“TPM Approach Implementation in Manufacturing Industry”, in Dronacharya Research Journal.

Attended ISTE sponsored Two Week Short Term Course on Environmental studies by IIT Bombay on 2nd - 12th June 2015.

Conducted one week programme on preparing student for placement/job interviews of Mechanical Engineering Department from 29 September to 05 October 2016.

Organised two days’ Workshop on Racing Car Design conducted by Winginfotech in association with the IIT Madras on August 26-27 2016.

Conducted five day workshop on solid works at Dronacharya College of Engineering.

Attended Half Day workshop on Green Building at Dronacharya College of Engineering, Gurgaon conducted by IIT, Bombay.

Seminar on IPR at Dronacharya College of Engineering, Gurgaon.

Two weeks workshop on Research Methodology 6th - 17th June 2016 at Dronacharya College of Engineering, Gurgaon organised by NITTTR, Chandigarh.

Attended Seminar on KAIZEN at CADD Center, DELHI.

Attended Seminar on Need of Natural Sources at ISKCON society, New Delhi.

Attended ISTE sponsored Two Week Short Term Course on Engineering Mechanics from 26 Nov to 6th Dec 2013 by IIT Bombay.

Attended ISTE sponsored Two Week Short Term Course on Fluid Mechanics from 20th-30th May 2014 by IIT KGP.

Attended workshop Recent Metrological Innovations.

Attended workshop Research Methodology.

Induction Training Programme through ICT.

Attended workshop Faculty development training by ARK Techno Solution.

One day seminar on Step 2 Research by ISTE.

Attended workshop AutoCAD through ICT.

Attended Short Term Course on AutoCAD, organised by NITTTR Chandigarh from 14th – 18th March 2016.

Attended ISTE sponsored Two Week Short Term Course on Engineering Physics organised by IIT Bombay from December 8-18, 2015.

Society of Automotive Engineering (SAE) -7160311208.

Indian Society of Technical Education(ISTE)-LM97476.

Institution of Mechanical Engineers (IMechE)- 80315876.

International Association of Engineers (IAENG).

International Journal of Engg. (IJOE).

Institution of Engineering & Technology (IET).

Haryana Technical Association (HTA).

Lifetime Member of American Society of Thermal and fluids Engineers (ASTFE).

Institute of Research Engineers and Doctors (IRED).

Mr. Lokesh Kumar

M. Tech. from “Deen Bandhu Chottu Ram University of Sc. & Technology, Murthal” in 2013.

B.Tech. from “SSGC Chandigarh” in 2011.

Certified course on AutoCAD-2010 from AUTODESK.

ROBOTYRST organized by ARK TECH.

MOS Certification on PowerPoint by Certiport.

Presently working as Assistant Professor in Department of Mechanical Engineering of Dronacharya College of Engineering, Khentawas, Farrukhnagar since 16th July, 2013.

6 Months Research experience in CSIR-CSIO Chandigarh.

Attended One day Workshop on Analytical Instrument in Applied Science and Engineering by DCRUST, Murthal.

One day Workshop on E.Coli. Bacteria by CCMB, at CSIR CSIO Chandigarh.

Workshop on Green Building by IIT, Bombay at DCE, Khentawas, Gurgaon.

One day seminaron sensing applications of Graphene Nanoplatelets by CSIR CSIO Chandigarh.

One day Workshop on Nanoparticles by DCRUST, Murthal.

Attended 1 Day Seminar on RECENT METALLURGIACL INNOVATIONS by MSME at USO House Delhi.

Attended Online Seminar on STEP TO RESEARCH organized by ISTE.

Attended Mathematical Modeling with METLAB PRODUCTS.

Attended Introduction to METLAB

Attended Structural analysis and Design Software.

Attended Sensor Measurement Fundamentals Online series.

Attended Data Analysis with METLAB for excels users.

Attended 2 days workshop on Automotive Engg. at DCE, Gurgaon.

Attended 10 days workshop on Fluid Mechanics by IIT Kharagpur .

Attended 2 days workshop on NPTEL AWARENESS by IIT Madras.

Attended 1 day workshop for Mentors on NPTEL AWARENESS by IIT Madras.

Attended Workshop on Pedagogy for effective use of ICT by IIT Bombay at DCE, Khentawas, Gurgaon.

Attended Faculty Coordinator for Team STAR RIDER at EFFICYCLE event by SAE.

Lifetime membership of Indian Society of Technical Education (ISTE).

Lifetime membership of IAENG.

1 year membership of Society of Automotive Engineers (SAE).

Lifetime membership of HTA.

Lifetime membership of MANSA.

6 weeks training in Engine Production Unit, Escorts Limited, Agri Machinery Group, Faridabad.

6 Months research work on Stress and Strain in Graphene Nano platelets at CSIR CSIO Chandigarh.

Manjari Saxena

M. Tech. (Energy Engg.) from Suresh GyanVihar University, Jaipur (2013).

B. Tech. (Mechanical) from Maharana Pratap Engg. College (2007).

Presently working as Assistant Professor in Mechanical Department in Dronacharya College of Engineering from 18th March 2015.

Worked as Sr. Lecturer in SKIT, Jaipur from July 2013 to Dec 2014.

Worked as Lecturer in Poornima Group of Institions, Jaipur from July 2010 to June 2013.

Worked as Engineer Projects in Fluid Line Engineers & Fabricators Pvt. Ltd. Kanpur from Jan 2008 - Jan 2010.

“Improvement of Surface Quality and Material Removal Rate in EDM Process” in IJRMST, Vol.3, Issue 4, Dec. 2015.

Manjari Saxena, Faheem Khan Warsi, “Biodiesel (Jatropha Oil) as an alternative fuel for Diesel Engines”, (National conference), GIT, Jaipur, April 2013.

Manjari Saxena, Vaibhav Sharma, “Green Electricity- Case study”, (National Conference), VIT, Jaipur, April 2013.

Attended 1 week Short Term Course on Integrated Automation Technologies at IIT Delhi on 1st June, 2015 to 7th June, 2015.

Attended 5 day workshop program organized by Wipro (Dale Carnigie Traning Under Mission 10x) on High Impact Teaching Skills.

Attended two weeks workshop on Environmental Studies at DCE, Gurgaon conducted by IIT, Bombay from 02-06-2015 to 12-06-2015.

Mr. Shashikant Das

M.Tech from IIT Kharagpur in 2015.

B.Tech from NIT Calicut in 2011.

Presently working as Assistant Professor in Mechanical Department in Dronacharya College of Engineering, Gurgaon from 27th July, 2015.

Seminar on “Evaluation of Outdoor thermal comfort using environmental indices” in IIT Kharagpur.

Seminar on “Design and fabrication of solar distillator” in NIT Calicut.

Lecture on “Development and Impact of the Modern high speed train” in IIT Kharagpur.

Lecture on “life cycle management in product” in IIT Kharagpur.

Attended one day International Symposium organized by IIT Kharagpur on 28th Feb 2015.